Alloy Wire memeriksa semua tahap produksi dan peralatan tes kami dapat membuktikan toleransi kawat/pita/ribbon/bagian/bentuk, kualitas permukaan, kebulatan, karakter kekuatan, dan tekanan yang dibutuhkan untuk titik putus.
Harap lihat toleransi standar kami di bawah ini.
Kami dapat menawarkan toleransi yang lebih ketat, beritahukan kami toleransi yang Anda butuhkan.
Toleransi Diameter Kawat
| mm | inch | ||||
|---|---|---|---|---|---|
| diameter kawat | hingga tapi kecuali | Toleransi | diameter kawat | hingga tapi kecuali | Toleransi |
| 0.0254 | 0.203 | ± 0.0051 | .001 | .008 | ± .0002 |
| 0.203 | 0.376 | ± 0.0076 | .008 | .015 | ± .0003 |
| 0.376 | 0.813 | ± 0.0100 | .015 | .032 | ± .0004 |
| 0.813 | 1.220 | ± 0.0127 | .032 | .048 | ± .0005 |
| 1.220 | 2.030 | ± 0.0152 | .048 | .080 | ± .0006 |
| 2.030 | 3.250 | ± 0.0203 | .080 | .128 | ± .0008 |
| 3.250 | 4.470 | ± 0.0254 | .128 | .176 | ± .0010 |
| 4.470 | 5.890 | ± 0.0381 | .176 | .232 | ± .0015 |
| 5.890 | 8.000 | ± 0.0510 | .232 | .315 | ± .0020 |
| 8.000 | 10.00 | ± 0.0635 | .315 | .395 | ± .0025 |
| 10.00 | 21.00 | ± 0.0762 | .395 | .827 | ± .0030 |
| Toleransi Kelonjongan Kawat | |||||
|---|---|---|---|---|---|
| mm | inch | ||||
| diameter kawat | hingga tapi kecuali | Toleransi | diameter kawat | hingga tapi kecuali | Toleransi |
| 0.0254 | 0.0508 | ± 0.0051 | .001 | .002 | ± .0002 |
| 0.0508 | 1.02 | ± 0.0076 | .002 | .040 | ± .0003 |
| 1.02 | 2.03 | ± 0.0100 | .040 | .080 | ± .0004 |
| 2.03 | 4.47 | ± 0.0127 | .080 | .176 | ± .0005 |
| 4.47 | 8.00 | ± 0.0152 | .176 | .315 | ± .0006 |
| 8.00 | 21.00 | ± 0.0203 | .315 | .827 | ± .0008 |
| Toleransi Kawat Pipih | |||
|---|---|---|---|
| mm | inch | ||
| Dimensi | Toleransi | Dimensi | Toleransi |
| Width | ± 5% | Width | ± 5% |
| Thickness | Thickness | ||
| 0.20 and below | ± 0.0100 | .008 and below | ± .0004 |
| over 0.20 | ± 5% | over .008 | ± 5% |
| Toleransi bentuk khusus | |||||
|---|---|---|---|---|---|
| mm | inch | ||||
| ukuran bagian | hingga tapi kecuali | Toleransi | ukuran bagian | hingga tapi kecuali | Toleransi |
| up to | 2.0 | ± 0.04 | up to | .787 | ± .0016 |
| 2.0 | 4.0 | ± 0.07 | .0787 | .157 | ± .0027 |
| 4.0 | and above | ± 0.15 | .157 | and above | ± .0059 |
| Toleransi Bilah Lurus | |||||
|---|---|---|---|---|---|
| mm | inch | ||||
| Diameter | Panjang | Toleransi | Diameter | Panjang | Toleransi |
| up to 2.5 | up to 1000 | ± 1.00 | up to .098 | up to 40 | ± .040 |
| up to 2.5 | 1000 – 2000 | ± 2.00 | up to .098 | 40 – 80 | ± .080 |
| up to 2.5 | 2000 – 3000 | ± 2.50 | up to .098 | 80 – 120 | ± .098 |
| 2.5 – 5.0 | up to 1000 | ± 2.00 | .098 – .197 | up to 40 | ± .080 |
| 2.5 – 5.0 | 1000 – 2000 | ± 2.50 | .098 – .197 | 40 – 80 | ± .098 |
| 2.5 – 5.0 | 2000 – 3000 | ± 3.00 | .098 – .197 | 80 – 120 | ± .120 |
| 5.0 – 12.0 | up to 1000 | ± 4.00 | .197 – .472 | up to 40 | ± .160 |
| 5.0 – 12.0 | 1000 – 2000 | ± 5.00 | .197 – .472 | 40 – 80 | ± .200 |
| 5.0 – 12.0 | 2000 – 3000 | ± 6.00 | .197 – .472 | 80 – 120 | ± .240 |
| Toleransi Resistan Listrik | |||||
|---|---|---|---|---|---|
| mm | inch | ||||
| diameter kawat | hingga tapi kecuali | Toleransi | diameter kawat | hingga tapi kecuali | Toleransi |
| 0.0254 | 0.0508 | ± 12% | .001 | .002 | ± 12% |
| 0.0508 | 0.076 | ± 10% | .002 | .003 | ± 10% |
| 0.076 | 0.15 | ± 7% | .003 | .006 | ± 7% |
| 0.15 | ± 5% | .006 | ± 5% | ||
| Kawat pipih | ± 5% | Kawat pipih | ± 5% | ||
